• ENiG PETSCII/ATASCII/RIP!

    From NuSkooler@21:1/121 to All on Fri Nov 13 13:51:31 2026
    ENiGMA 1/2 BBS now speaks to more than just ANSI terminals! Three new kinds
    of callers are now supported:

    * PETSCII - Commodore-style terminals, with native .seq art.

    * ATASCII - Atari 8-bit terminals, with native .ata art.

    * RIP - RIPscrip graphics on top of ANSI. SyncTERM and IcyTerm
    have been tested the most, definitely welcome some testers!

    Each one comes with a small optional set of starter menus, offered by "oputil.js config new", so there is something to see on day one. Menus
    can also branch on the caller's terminal with the new TE[...] ACS code.

    Existing boards are not changed by any of this: ANSI callers see what
    they always did, and nothing new is turned on until you enable it.

    Docs: https://enigma-bbs.github.io/
    Source: https://github.com/NuSkooler/enigma-bbs

    Bug reports and screenshots from real hardware are very welcome!


    --
    |08 ■ |12NuSkooler |06// |12Xibalba |08- |07"|06The place of fear|07"
    |08 ■ |03xibalba|08.|03vip |08(|0344510|08/|03telnet|08, |0344511|08/|03ssh|08) |08 ■ |03ENiGMA 1/2 WHQ |08| |03Phenom |08| |0367 |08| |03iMPURE |08| |03ACiDic --- ENiGMA 1/2 v0.6.0-beta (linux; x64; 22.22.2)
    * Origin: Xibalba -+- xibalba.vip:44510 (21:1/121)
  • From Michael Geller@21:1/177.101 to NuSkooler on Fri Nov 13 21:57:21 2026
    ENiGMA 1/2 BBS now speaks to more than just ANSI terminals! Three new kinds of callers are now supported:

    * PETSCII - Commodore-style terminals, with native .seq art.

    * ATASCII - Atari 8-bit terminals, with native .ata art.

    * RIP - RIPscrip graphics on top of ANSI. SyncTERM and IcyTerm
    have been tested the most, definitely welcome some testers!

    Each one comes with a small optional set of starter menus, offered by "oputil.js config new", so there is something to see on day one. Menus
    can also branch on the caller's terminal with the new TE[...] ACS code.

    Existing boards are not changed by any of this: ANSI callers see what
    they always did, and nothing new is turned on until you enable it.

    Docs: https://enigma-bbs.github.io/
    Source: https://github.com/NuSkooler/enigma-bbs

    Bug reports and screenshots from real hardware are very welcome!

    Nice :) I will test it on my Enigma installation.

    Greetings
    Michael
    --- binkpoint 1.2
    * Origin: Binkpoint Dev (21:1/177.101)
  • From NuSkooler@21:1/121 to Michael Geller on Fri Nov 13 19:55:50 2026
    On Saturday, November 14th Michael Geller was heard saying...
    Nice :) I will test it on my Enigma installation.

    Let me know how it goes! Which "system" do you plan on trying out with it?

    --
    |08 ■ |12NuSkooler |06// |12Xibalba |08- |07"|06The place of fear|07"
    |08 ■ |03xibalba|08.|03vip |08(|0344510|08/|03telnet|08, |0344511|08/|03ssh|08) |08 ■ |03ENiGMA 1/2 WHQ |08| |03Phenom |08| |0367 |08| |03iMPURE |08| |03ACiDic --- ENiGMA 1/2 v0.6.0-beta (linux; x64; 22.22.2)
    * Origin: Xibalba -+- xibalba.vip:44510 (21:1/121)
  • From Michael Geller@21:1/177.101 to NuSkooler on Sat Nov 14 22:10:48 2026
    On Saturday, November 14th Michael Geller was heard saying...
    Nice :) I will test it on my Enigma installation.

    Let me know how it goes! Which "system" do you plan on trying out with it?

    Hi NuSkooler,

    my setup: ENiGMA 1/2 0.6.0-beta (updated
    yesterday to current master) on Debian Linux
    with its own Node 22, running alongside Mystic
    on the same server.

    It carries fsxNet and GooseNet, which I host
    myself, and exchanges mail with Mystic via
    BinkP. Access is via telnet, SSH and a web
    terminal at enigma.g00r00.com. The theme is a
    custom one that looks like my Mystic board.

    PETSCII, ATASCII and RIP are not enabled yet.
    I'd probably start with PETSCII for C64
    callers. Any tips on what to watch out for?

    Greetings
    Michael
    --- binkpoint 1.2.2
    * Origin: Binkpoint Dev (21:1/177.101)
  • From NuSkooler@21:1/121 to Michael Geller on Sun Nov 15 12:59:02 2026
    On Sunday, November 15th Michael Geller said...
    my setup: ENiGMA 1/2 0.6.0-beta (updated yesterday to current master) on Debian Linux with its own Node 22, running alongside Mystic on the same server. ...
    PETSCII for C64 callers. Any tips on what to watch out for?

    Any weird drawing issues of course. To get a fully working "C64" system, you'll want to make sure you configure all your menus to work with differnet key mappings for a few things most likely -- the default config might use some that are awkward on a real C64. Some areas might assume the wrong screen size vs what is being used, but I think most of that has been weeded out at this point.

    Whatever you run into, don't be shy about shouting! When you have it up with the PETSCII config I def want to check it out!

    --
    |08 ■ |12NuSkooler |06// |12Xibalba |08- |07"|06The place of fear|07"
    |08 ■ |03xibalba|08.|03vip |08(|0344510|08/|03telnet|08, |0344511|08/|03ssh|08) |08 ■ |03ENiGMA 1/2 WHQ |08| |03Phenom |08| |0367 |08| |03iMPURE |08| |03ACiDic --- ENiGMA 1/2 v0.6.0-beta (linux; x64; 22.22.2)
    * Origin: Xibalba -+- xibalba.vip:44510 (21:1/121)
  • From Michael Geller@21:1/177.101 to NuSkooler on Sun Nov 15 21:37:45 2026
    Any weird drawing issues of course. To get a fully working "C64" system, you'll want to make sure you configure all your menus to work with differnet key mappings for a few things most likely -- the default config might use some that are awkward on a real C64. Some areas might assume the wrong screen size vs what is being used, but I think most of that has been weeded out at this point.

    Whatever you run into, don't be shy about shouting! When you have it up with the PETSCII config I def want to check it out!

    Hi NuSkooler,

    thanks for the tips! PETSCII is now up
    on my ENiGMA, ready for you to test:

    SyncTERM/IcyTerm:
    enigma.g00r00.com port 2323 (telnet,
    screen mode C64)
    Real C64 or VICE + tcpser:
    enigma.g00r00.com port 6400
    (every caller is treated as PETSCII)

    C64 callers get login, last callers,
    who's online and messages in 40 columns,
    with plain letter keys. The art is still
    the petscii_starter placeholder theme.

    Things I noticed:
    - "1/2" in "ENiGMA 1/2" shows as "?"
    - it takes 4-5 seconds until the login
    prompt, keys pressed before get lost
    - new users have to sign up via ANSI

    Let me know how it looks on your side!

    Greetings
    Michael
    --- binkpoint 1.4
    * Origin: Binkpoint Dev (21:1/177.101)
  • From Michael Geller@21:1/177.101 to NuSkooler on Mon Nov 16 00:41:17 2026
    Whatever you run into, don't be shy about shouting! When you have it up with the PETSCII config I def want to check it out!

    Update: PETSCII now has two ports:

    C64, 40 columns:
    enigma.g00r00.com port 6400
    C128, 80 columns:
    enigma.g00r00.com port 6401
    (SyncTERM screen mode C128 80col)

    Both have login, new user signup,
    last callers, who's online and
    messages, plus a Commodore splash.

    Feedback is welcome :)

    Cheers
    Michael
    --- binkpoint 1.6
    * Origin: Binkpoint Dev (21:1/177.101)
  • From NuSkooler@21:1/121 to Michael Geller on Mon Nov 16 14:21:08 2026
    Twas Monday, November 16th when Michael Geller said...
    Let me know how it looks on your side!

    Nice! I'll check it out in a bit


    Twas Monday, November 16th when Michael Geller said...
    Things I noticed: - "1/2" in "ENiGMA 1/2" shows as "?" - it takes 4-5 seconds until the login prompt, keys pressed before get lost - new users have to sign up via ANSI

    Yeah, I think the 1/2 symbol needs a better mapping, though I might have to special case it just for "enigma 1/2" hehe. 4-5s pause is terminal detect queries/etc.

    For the ANSI thing, that's all up to the op to create new artwork in PETSCII/whatever, so hack away! You can also use your own mod (vs built in nup.js) for example, if you want to collect differnt info/have a different flow/whatever.

    --
    |08 ■ |12NuSkooler |06// |12Xibalba |08- |07"|06The place of fear|07"
    |08 ■ |03xibalba|08.|03vip |08(|0344510|08/|03telnet|08, |0344511|08/|03ssh|08) |08 ■ |03ENiGMA 1/2 WHQ |08| |03Phenom |08| |0367 |08| |03iMPURE |08| |03ACiDic --- ENiGMA 1/2 v0.6.0-beta (linux; x64; 22.22.2)
    * Origin: Xibalba -+- xibalba.vip:44510 (21:1/121)
  • From Michael Geller@21:1/177.101 to NuSkooler on Mon Nov 16 23:37:27 2026
    Twas Monday, November 16th when Michael Geller said...
    Let me know how it looks on your side!

    Nice! I'll check it out in a bit


    Twas Monday, November 16th when Michael Geller said...
    Things I noticed: - "1/2" in "ENiGMA 1/2" shows as "?" - it takes 4-5
    seconds until the login prompt, keys pressed before get lost - new
    users have to sign up via ANSI

    Yeah, I think the 1/2 symbol needs a better mapping, though I might have to special case it just for "enigma 1/2" hehe. 4-5s pause is terminal detect queries/etc.

    For the ANSI thing, that's all up to the op to create new artwork in PETSCII/whatever, so hack away! You can also use your own mod (vs built in nup.js) for example, if you want to collect differnt info/have a different flow/whatever.

    Thanks! No rush.

    Good news on the sign-up: I already set up
    PETSCII new-user apply on my board, so C64
    and C128 callers can now register without
    switching to ANSI. Works fine here.

    The 4-5 second pause makes sense now, thanks
    for explaining. And a special case for the
    "1/2" would be great - "ENiGMA ?" looks a bit
    funny on a C64 :)

    Michael
    --- binkpoint 1.10
    * Origin: Binkpoint Dev (21:1/177.101)