1. Forum
  2. FSXNet
  3. FSX BBS

  • fsxnet file areas on Synchronet

    From infectedbootsector@21:4/174 to All on Fri Feb 17 17:07:55 2023
    Hi all,

    Anyone here a sysop of a SynchroNet board and succesfully using the file areas from fsxnet?

    I had them set up and working just fine on Mystic. I've got what I think is a good config on Synchronet but something is clearly missing. The areas are set up. Log review doesn't show anything obvious. At some point, it seemed to be working at least partially because I was seeing some files for the images area coming in (the APOD pics from NASA). THey weren't getting tossed to the areas though...


    Orbiting at -=[ExoPlanet]=-
    --- SBBSecho 3.14-Win32
    * Origin: exoplanetbbs.net (21:4/174)
  • From deon@21:2/116 to infectedbootsector on Sat Feb 18 10:39:07 2023
    Re: fsxnet file areas on Synchronet
    By: infectedbootsector to All on Fri Feb 17 2023 05:07 pm

    Anyone here a sysop of a SynchroNet board and succesfully using the file areas from fsxnet?

    I do.

    Log review doesn't show anything obvious.

    What does it show?


    ...δεσ∩
    --- SBBSecho 3.15-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From infectedbootsector@21:4/174 to deon on Sat Feb 18 09:52:34 2023
    Re: fsxnet file areas on Synchronet
    By: deon to infectedbootsector on Sat Feb 18 2023 10:39:07

    Re: fsxnet file areas on Synchronet
    Hi deon,

    Thanks for your reply. On examination of the sbbsecho log, I see nothing related to the file areas. This jogged my memory a bit and I realize I don't have a TIC processor configured on here.

    It's been years and years since I've set this up, so it's a journey in memory recall in some cases. The documentation is thin on file areas, but I think this is the problem now.

    I'll keep plugging away at it as I have time this weekend. Are you using TickIt?

    -InfectedBootSector
    exoplanetbbs.net
    Orbiting at -=[ExoPlanet]=-
    --- SBBSecho 3.14-Win32
    * Origin: exoplanetbbs.net (21:4/174)
  • From Matthew Munson@21:4/108 to Infectedbootsector on Sat Feb 18 07:30:07 2023
    BY: infectedbootsector (21:4/174)


    |11i|09> |10Thanks for your reply. On examination of the sbbsecho log, I see|07
    |11i|09> |10nothing related to the file areas. This jogged my memory a bit and I|07
    |11i|09> |10realize I don't have a TIC processor configured on here.|07
    I think Synchronet has its own internal tic processor.


    --- WWIV 5.8.0.3677
    * Origin: inland utopia * california * iutopia.duckdns.org:2023 (21:4/108)
  • From Slinky@21:4/185 to Matthew Munson on Sat Feb 18 13:48:19 2023

    My Synchronet install uses Tickit.
    --- SBBSecho 3.11-Win32
    * Origin: Slinky's Place - slinkybbs.com (21:4/185)
  • From Al@21:4/106 to infectedbootsector on Sat Feb 18 12:10:00 2023
    I'll keep plugging away at it as I have time this weekend. Are you using TickIt?

    There is a wiki page fot TickIT that explains pretty much everything..

    http://wiki.synchro.net/module:tickit

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)
  • From deon@21:2/116 to infectedbootsector on Sun Feb 19 09:31:29 2023
    Re: fsxnet file areas on Synchronet
    By: infectedbootsector to deon on Sat Feb 18 2023 09:52 am

    I'll keep plugging away at it as I have time this weekend. Are you using TickIt?

    I do use tickit yes.

    IMHO, setting up file processing is a little complex, but it does work.

    You need to define the area in scfg, then in tickitcfg define the tag and link to the area.

    Running jsexec -n tickit normally gives you a good reason why TIC files havent been processed (and you can run it many times until you see that the TIC files do get processed).


    ...δεσ∩
    --- SBBSecho 3.15-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From infectedbootsector@21:4/174 to deon on Sun Feb 19 08:55:48 2023
    Re: fsxnet file areas on Synchronet
    By: deon to infectedbootsector on Sun Feb 19 2023 09:31:29

    Hi Deon,
    Got it working, and thanks for the memory jog. All that was missing was the tic processor configuration. Easy enough to fix.

    -=[IBS]=-



    I'll keep plugging away at it as I have time this weekend. Are you using TickIt?

    I do use tickit yes.

    IMHO, setting up file processing is a little complex, but it does work.

    You need to define the area in scfg, then in tickitcfg define the tag and link to the area.

    --- SBBSecho 3.14-Win32
    * Origin: exoplanetbbs.net (21:4/174)