Hi folks !

I have something a bit weird.

When I try to poll fsxNet with an event, I've got an authorization error. If
I poll the server in shell, everything is ok. Here is a short part of what I got on my poll.log :

With shell :
--------------------- POLL v1.12 A48 2023/01/15 Sun, Jan 29 2023 (loglevel
1)
+ 2023.01.29 22:16:21 Poll BINKP node via address lookup: 21:1/100
+ 2023.01.29 22:16:21 1-Polling 21:1/100 on slot 1 via BINKP
+ 2023.01.29 22:16:21 1-DEBUG ConnectMode=0
+ 2023.01.29 22:16:21 1-Connecting to agency.bbs.nz on port 24556
+ 2023.01.29 22:16:21 1-Using address 219.89.83.33
+ 2023.01.29 22:16:21 1-Connected by IPV4 to 219.89.83.33
+ 2023.01.29 22:16:21 1-System Agency + Risa HUB
+ 2023.01.29 22:16:21 1-SysOp Paul Hayton
+ 2023.01.29 22:16:21 1-Location Dunedin, New Zealand
+ 2023.01.29 22:16:21 1-Mailer binkd/1.1a-115/Linux binkp/1.1
+ 2023.01.29 22:16:22 1-Receiving: d6daab08.mo0 (8,275 bytes)
+ 2023.01.29 22:16:22 1-Received: d6daab08.mo0 (8,275 bytes in 0.19s)
+ 2023.01.29 22:16:22 1-Session ended (0 sent, 1 rcvd, 0 skip)
+ 2023.01.29 22:16:24 Polled 1 systems

With Event manager :

--------------------- POLL v1.12 A48 2023/01/15 Sun, Jan 29 2023 (loglevel 1) + 2023.01.29 22:18:02 Poll BINKP node via address lookup: 21:1/100
+ 2023.01.29 22:18:02 1-Polling 21:1/100 on slot 1 via BINKP
+ 2023.01.29 22:18:02 1-DEBUG ConnectMode=0
+ 2023.01.29 22:18:02 1-Connecting to agency.bbs.nz on port 24556
+ 2023.01.29 22:18:02 1-Using address 219.89.83.33
+ 2023.01.29 22:18:02 1-Connected by IPV4 to 219.89.83.33
+ 2023.01.29 22:18:02 1-System Agency + Risa HUB
+ 2023.01.29 22:18:02 1-SysOp Paul Hayton
+ 2023.01.29 22:18:02 1-Location Dunedin, New Zealand
+ 2023.01.29 22:18:02 1-Mailer binkd/1.1a-115/Linux binkp/1.1
+ 2023.01.29 22:18:03 1-Authorization failed
+ 2023.01.29 22:18:03 Polled 1 systems

I'm on the latest version of Mystic BBS with linux. Any idea ?

... Error 3032 - Recursion error. See error 3032.

--- Mystic BBS v1.12 A48 (Linux/64)
* Origin: ZorgluBBS (21:1/235)

Re: What did I do wrong with my events config ?
By: pitichampi to All on Sun Jan 29 2023 10:26 pm

Howdy,

I have something a bit weird.

When I try to poll fsxNet with an event, I've got an authorization error. If

It means your BINKP session password doesnt match what Paul has for you.


...δεσ∩
--- SBBSecho 3.15-Linux
* Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

I'm on the latest version of Mystic BBS with linux. Any idea ?

I wonder if you need to restart mis? I have found that if you make changes to your linked nodes in "./mystic -cfg" you need to shutdown and restart mis so it is using your changed config.

I'm not sure this will help or not but it's worth a try.

--- BBBS/Li6 v4.10 Toy-6
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106)

On 29 Jan 2023 at 10:26p, pitichampi pondered and said...

+ 2023.01.29 22:18:02 1-Mailer binkd/1.1a-115/Linux binkp/1.1
+ 2023.01.29 22:18:03 1-Authorization failed
+ 2023.01.29 22:18:03 Polled 1 systems

this means our BinkP passwords do not match, I am not near my system to check logs at the moment, but just check your session password and perhaps make sure mis server is shutdown before you make those changes, then restart mis server afterwards

Kerr Avon [Blake's 7] 'I'm not expendable, I'm not stupid and I'm not going' avon[at]bbs.nz | bbs.nz | fsxnet.nz

--- Mystic BBS v1.12 A48 (Linux/64)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

It seems to work now... Even if I had an authorization failed at first but the 2 last events seem to work fine according to the logs. Let's go for some new adventures =)

Best regards to everyone !

... When all else fails, read the instructions

--- Mystic BBS v1.12 A48 (Linux/64)
* Origin: ZorgluBBS (21:1/235)