• RPi desktop on a Aer Aspire TC-780 - amy gotya's ?

    From R.Wieser@3:633/10 to All on Fri Nov 20 10:02:24 2026
    Hello all,

    Recently I got an old Acer Aspire TC-780 (Win10), and, as I already got some RPi's, I thought of putting "Raspberry Pi Desktop" on it ( https://www.raspberrypi.com/software/operating-systems/ , at the bottom).

    The TC-780 comes with, if I interpret the specs correctly, a combined
    HDD+SSD (1TB, 128GB).

    I take it I just put the downloaded ISO onto a thumbdrive, plug it into the 'puter, boot from it and than follow the instructions to install the new OS.

    My question is : are there any gotya's I should be aware of ? A specific
    BIOS configuration perhaps ? Anything else I should be aware of ?

    Regards,
    Rudy Wieser



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Tim Albers@3:633/10 to All on Fri Nov 20 11:01:54 2026
    Am 20.11.2026 um 10:41 schrieb Andy Burns:
    Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device, with the 128GB acting as a 'hidden' cache.

    Nope, it's a desktop PC with a small SATA SSD for the OS and a regular magnetic HDD for storage.

    --
    SunDancer
    All your squigs are belongz to me!
    [TAG] Fairy & [POLL]-Enforcer
    https://www.warmonger.de | https://www.rgmw.org

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Paul@3:633/10 to All on Sat Nov 21 12:30:02 2026
    On Fri, 11/20/2026 4:02 AM, R.Wieser wrote:
    Hello all,

    Recently I got an old Acer Aspire TC-780 (Win10), and, as I already got some RPi's, I thought of putting "Raspberry Pi Desktop" on it ( https://www.raspberrypi.com/software/operating-systems/ , at the bottom).

    The TC-780 comes with, if I interpret the specs correctly, a combined HDD+SSD (1TB, 128GB).

    I take it I just put the downloaded ISO onto a thumbdrive, plug it into the 'puter, boot from it and than follow the instructions to install the new OS.

    My question is : are there any gotya's I should be aware of ? A specific BIOS configuration perhaps ? Anything else I should be aware of ?

    Regards,
    Rudy Wieser

    You could boot into Win10, and use Disk Management (right-click Start and
    it is in the menu), and you can look at the disk configuration and
    orient yourself with respect to what the two devices are doing
    right now. Like the 1TB drive could have a single partition saying "Data"
    and the 128GB SSD could have a partition that ways "Windows".

    You know how to poke around in there, and figure out the disk layout.

    Then you can decide, what OS you want to install, and where is the
    best place to install it.

    Someone may have swapped used storage devices in place of the
    original ones. In Win10, I would use something like "CrystalDiskInfo9_5_0.zip" to check the SMART data on the SSD and determine what percentage of life is left on the drive. It's unlikely to be totally worn out, but you should
    be checking the brand and model, because some older ones are a real
    liability as storage (the first generation had some "drop dead" SSDs
    that caused grief). It took a while for the industry to learn how to
    write firmware for SSD drives. Intel staff, when they entered the
    SSD business, they took one look at the code the other companies
    were using, and they did an eye-roll, the code was so bad.

    If *anything* in that box needs to be replaced, or if an item
    was removed by the refurbisher to cheapen the item, these days
    the replacement cost of just about any item inside that PC,
    is going to cost you more than the entire purchase price of the
    refurb. Now, more than ever, you're depending on the refurbisher
    company to be an honest one.

    Paul

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From John R Walliker@3:633/10 to All on Fri Nov 20 13:41:49 2026
    On 20/11/2026 12:14, Paul wrote:
    On Fri, 11/20/2026 4:02 AM, R.Wieser wrote:
    Hello all,

    Recently I got an old Acer Aspire TC-780 (Win10), and, as I already got some >> RPi's, I thought of putting "Raspberry Pi Desktop" on it (
    https://www.raspberrypi.com/software/operating-systems/ , at the bottom).

    The TC-780 comes with, if I interpret the specs correctly, a combined
    HDD+SSD (1TB, 128GB).

    I take it I just put the downloaded ISO onto a thumbdrive, plug it into the >> 'puter, boot from it and than follow the instructions to install the new OS. >>
    My question is : are there any gotya's I should be aware of ? A specific
    BIOS configuration perhaps ? Anything else I should be aware of ?

    Regards,
    Rudy Wieser

    You could boot into Win10, and use Disk Management (right-click Start and
    it is in the menu), and you can look at the disk configuration and
    orient yourself with respect to what the two devices are doing
    right now. Like the 1TB drive could have a single partition saying "Data"
    and the 128GB SSD could have a partition that ways "Windows".

    You know how to poke around in there, and figure out the disk layout.

    Then you can decide, what OS you want to install, and where is the
    best place to install it.

    Someone may have swapped used storage devices in place of the
    original ones. In Win10, I would use something like "CrystalDiskInfo9_5_0.zip"
    to check the SMART data on the SSD and determine what percentage of life is left on the drive. It's unlikely to be totally worn out, but you should
    be checking the brand and model, because some older ones are a real
    liability as storage (the first generation had some "drop dead" SSDs
    that caused grief). It took a while for the industry to learn how to
    write firmware for SSD drives. Intel staff, when they entered the
    SSD business, they took one look at the code the other companies
    were using, and they did an eye-roll, the code was so bad.

    Maybe, but then they did something even worse by locking the drive
    when the specified number of writes had been reached, even if the
    drive was actually fine.
    Many drives (certainly some Samsung ones) have far better write
    endurance than their specification suggests.


    If *anything* in that box needs to be replaced, or if an item
    was removed by the refurbisher to cheapen the item, these days
    the replacement cost of just about any item inside that PC,
    is going to cost you more than the entire purchase price of the
    refurb. Now, more than ever, you're depending on the refurbisher
    company to be an honest one.

    Paul


    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From R.Wieser@3:633/10 to All on Fri Nov 20 12:25:19 2026
    Tim,

    Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device,
    with the 128GB acting as a 'hidden' cache.

    Nope, it's a desktop PC with a small SATA SSD for the OS and a regular magnetic HDD for storage.

    I think Andy is right in regard to the "hybrid SSHD device". Other than the CD/DVD drive there seems to be only a single other device connected to a
    SATA connector. I've also looked if there was perhaps a SSD module on the motherboard itself, but could not find anything.

    I'm not so sure that the SSD part will be a hidden chache though. The BIOS shows them (HDD, SSD) seperatily, so I'm assuming that I (read: Linux) can access them seperatily.

    But... No known gotya's ?

    Regards,
    Rudy Wieser



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From R.Wieser@3:633/10 to All on Fri Nov 20 12:15:11 2026
    Andy,

    Sounds like a 'hybrid' SSHD device,

    Yep. I've been looking for a second drive - or even something special on
    the motherboard - but did only find a single drive.

    will just show as a 1TB sata device, with the 128GB acting as a 'hidden' cache.

    That's possible. Though the BIOS showed one to be connected to SATA1 and
    the other to SATA2.

    IOW, its quite possible that both will be visible from another OS than
    Win10.

    ... and as I'm going to install a Linux version ...

    I guess I will find out soon enough. :-)

    Regards,
    Rudy Wieser



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Theo@3:633/10 to All on Fri Nov 20 13:48:09 2026
    In comp.sys.raspberry-pi R.Wieser <address@is.invalid> wrote:
    Tim,

    Sounds like a 'hybrid' SSHD device, will just show as a 1TB sata device, >> with the 128GB acting as a 'hidden' cache.

    Nope, it's a desktop PC with a small SATA SSD for the OS and a regular magnetic HDD for storage.

    I think Andy is right in regard to the "hybrid SSHD device". Other than
    the CD/DVD drive there seems to be only a single other device connected to
    a SATA connector. I've also looked if there was perhaps a SSD module on
    the motherboard itself, but could not find anything.

    It's supposed to be at the very front of the mobo - see number 9 here: https://community.acer.com/en/discussion/638030/what-is-really-the-m-2-tech-specs-of-aspire-tc-780-ur15

    I'm not so sure that the SSD part will be a hidden chache though. The BIOS shows them (HDD, SSD) seperatily, so I'm assuming that I (read: Linux) can access them seperatily.

    A 'hybrid' drive wouldn't show up separately, but this appears to be a
    separate M.2 stick - probably SATA M.2 if it shows up as a SATA disc.

    I'll be limited to SATA speeds (about 550MB/s) but still quicker than the
    HDD.

    I'd install RPi OS on the 128GB drive and then you can mount the HDD for
    user data later. 128GB should be plenty for installing apps and other
    system stuff.

    Theo

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From R.Wieser@3:633/10 to All on Fri Nov 20 14:15:24 2026
    Paul,

    You could boot into Win10, and use Disk Management

    I can boot into Win10 alright, but than I'm shown a user-login screen.
    Which I can't pass (?). So, no access to Disk Management either (?).

    (in case you are unaware, I'm not a Win10 user. Other than *very* superficially I have no idea how it works)

    You know how to poke around in there, and figure out the disk layout.

    Thats one of the gotya's I was thinking of : I'm accustomed to Windows installations where I can delete and create partitions as part of the installation process, but I've got no idea if Linux offers the same.

    because some older ones are a real liability as storage (the first
    generation had some "drop dead" SSDs that caused grief).

    As the the 'puter - and its drive - has survived its previous user(s) I'm
    going to assume it will survive me too. :-)

    But in the case that the SSD would crash but the HDD still would function I could just re-install the whole thing on that. And if it totally crashes
    than I've got a few spare SATA drives laying about.

    If *anything* in that box needs to be replaced, or if an item
    was removed by the refurbisher to cheapen the item,

    No refurbisher involved. Someone put it outside as trash, and I decided to take a chance. The thing looks complete - no dangling wires.

    Regards,
    Rudy Wieser




    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Paul@3:633/10 to All on Sat Nov 21 12:53:17 2026
    On Fri, 11/20/2026 8:15 AM, R.Wieser wrote:
    Paul,

    You could boot into Win10, and use Disk Management

    I can boot into Win10 alright, but than I'm shown a user-login screen.
    Which I can't pass (?). So, no access to Disk Management either (?).

    A technical challenge then :-)

    OK, now I see why you're in a paving mood.

    One problem is, there were some nice (reasonably easy)
    hacks to become Administrator while booting.

    There was the OSK hack (replace OnScreenKeyboard executable
    with cmd.exe) and one other file could be abused in
    a similar manner, and when that Command Prompt opens,
    it happens to be Administrator. You can then enable
    the Real Administrator account (and set a password for it).

    Once the hack is executed, the next time you boot, the
    challenge page lists multiple accounts in the lower left
    corner, you select "Administrator", enter that fresh
    password, and... you're in. I helped someone remotely
    to do this once, he succeeded, but it was like pulling
    teeth and took a fairly long thread before he was in.

    A couple of those holes were closed by later patches
    to Windows. As far as I know, there is one hack left
    that was not patched. There used to be a web page that
    tracked the hacks (it doesn't tell you which ones
    are blocked, it just describes the palette of hacks
    available to you).

    An example of some terminology...

    https://www.reddit.com/r/sysadmin/comments/bp9nul/windows_10_reset_local_administrator_password/

    But it does not work because the utilman.exe (or osk.exe or sethc.exe) does not exist!

    I believe one of the tricks, was to start in Safe Mode, Windows Defender
    is not loaded then, and then the hack works again. But even getting
    Safe Mode to work, is a bitch (it's not like the old
    days where hammering on F8 always worked). You need to boot installer media, select Troubleshooting instead of Install, use the Command Prompt,
    and add Safe Boot to the menu. From my notes:

    F8 boot menu for Windows 10:

    dir /AH C:\boot\BCD # verify The BCD file is there.
    # It is a registry hive and is binary inside
    # You cannot edit the BCD, unless you know where it is.

    bcdedit /store C:\boot\BCD /set {bootmgr} displaybootmenu True

    That gives an F8 menu, you Safe Boot, then pretend to be
    using the On Screen Keyboard to enter the password (as if you
    had a touch screen), and instead of osk.exe executing, your
    copy of cmd.exe executes instead and you become administrator.
    And from there, enable the Real Administrator account and now
    you have elevated yourself in.

    net user administrator /active:yes # Turn on the disabled Administrator account

    net user Administrator 12345 # Set a password for the Real Administrator account

    There is no need of Administrator being activated. You don't leave it turned on.
    As long as a newuser you create belongs to the Administrator group,
    that's like "sudo" in Linux. The UAC prompt signals a "sudo attempt" in Windows.
    So once an account you own belongs to Administrator group, you can set
    that active:no again.

    Anyway, I know you have no interest in stuff like this, so pave away.

    If you boot a Linux Mint for example, you can use "gnome-disks" to
    review the partitions using a graphical view similar to Disk Management.
    There is also gparted, sudo gparted, and you can select one of the
    devices and review the partition set. You could even do a part of
    the hack to get back in from there, but the

    bcdedit /store C:\boot\BCD /set {bootmgr} displaybootmenu True

    still has to be done, to get rid of the roadblock Microsoft inserted.

    Paul

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From R.Wieser@3:633/10 to All on Fri Nov 20 15:47:38 2026
    Theo,

    I think Andy is right in regard to the "hybrid SSHD device". Other
    than the CD/DVD drive there seems to be only a single other device
    connected to a SATA connector. I've also looked if there was perhaps
    a SSD module on the motherboard itself, but could not find anything.

    It's supposed to be at the very front of the mobo - see number 9 here:
    [Snip]

    It turns out you're right.

    After I disconnected the HDD and still saw the SSD in the BIOS I took a
    better look at the location you mentioned, and saw the SSD module - laying flat on the motherboard and the of same color (which is why I overlooked it
    : I expected a big module, like the RAM ones, sticking up from the motherboard).

    An closer look showed that the SSD module is in a socket, and not soldered directly onto the motherboard. If it fails it can be replaced (or removed).

    I'd install RPi OS on the 128GB drive and then you can mount the HDD
    for user data later.

    Inclusive the swap partition ? I assumed that the HDD would be a better place for it.

    128GB should be plenty for installing apps and other
    system stuff.

    :-) As an RPi can run on a 4GB micro-SD I must assume that 128GB is way,
    way, waaaay more than plenty for it.


    Still no gotya's. Must be my lucky day.

    Regards,
    Rudy Wieser



    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)
  • From Theo@3:633/10 to All on Fri Nov 20 15:20:20 2026
    In comp.sys.raspberry-pi R.Wieser <address@is.invalid> wrote:
    Theo,

    I'd install RPi OS on the 128GB drive and then you can mount the HDD
    for user data later.

    Inclusive the swap partition ? I assumed that the HDD would be a better place for it.

    Swap wants to be as fast as possible, so SSD is better for that. There's a small impact of extra wear on the SSD, but unless you're thrashing swap all
    day every day it's unlikely to be an issue. If you keep some amount like
    10% of the SSD zeroed then the controller can use those blocks to improve
    the wear lifetime ('over provisioning').

    Swap can also be used for hibernate, so it's useful to have at least as much
    as the physical RAM you have (although it's possible to also use a hibernate file).

    128GB should be plenty for installing apps and other
    system stuff.

    :-) As an RPi can run on a 4GB micro-SD I must assume that 128GB is way, way, waaaay more than plenty for it.

    Indeed :)

    Theo

    --- PyGate Linux v1.5.19
    * Origin: Dragon's Lair, PyGate NNTP<>Fido Gate (3:633/10)