1. Forum
  2. AgoraNet
  3. AGN TST

  • Test from Pharcyde to Boneyard

    From Knight Shadow@46:1/700 to All on Tue Aug 18 16:43:43 2026
    Sending message from Pharcyde to see if it reaches AGN_TST at The Boneyard. Inbound test to Boneyard.
    |08[|07K|08N1GHT|07S|08HAD0W]
    |08[...|070|08F.|07T|08H3...]
    |08[|07B|080NEYARD.|07B|08BS]
    --- SBBSecho 3.37-Linux
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/700)
  • From Accession@46:1/700 to Knight Shadow on Tue Aug 18 17:02:02 2026
    Hey Knight!

    On Tue, 18 Aug 2026 16:43:43, you wrote:

    Sending message from Pharcyde to see if it reaches AGN_TST at The
    Boneyard. Inbound test to Boneyard.

    Did it work?

    Regards,
    Nick

    ... Sarcasm, because beating people up is illegal.
    --- SBBSecho 3.37-Linux
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/700)
  • From Knight Shadow@46:1/700 to Accession on Tue Aug 18 21:13:37 2026
    Hello Accession,

    On Tue Aug 18 2026 05:02 pm CDT, you wrote:

    Did it work?

    Messages coming IN from my uplink into my BBS work it seems. But, for some reason, the ones going OUT of my BBS are not showing up here.

    I'm still troubleshooting to try and see why by looking at my Mystic logs. I'm haflway there, I just need to see what is happening.

    I think I will try:

    1. Sending another message in the AGN_TST channel.
    2. Manually run mutil.exe to generate the packets and verify they go into the outbound folder for Agora.
    3. Manually run mis.exe to poll the outbound folder and send the packets out to Agora.
    4. Verify that the files no longer exist in the outbound folder.
    5. Verify there were no errors logged for the poll mis.exe did.

    So that should tell me at least that they are going out of the system? I'm not sure what you can see on your end, to see if anything from my board is coming in to the echonet. For example I responded to your previous message from my board earlier today, but don't see it here. So not sure if you can see that message to show that it indeed was sent out from The Boneyard?
    |08[|07K|08N1GHT|07S|08HAD0W]
    |08[...|070|08F.|07T|08H3...]
    |08[|07B|080NEYARD.|07B|08BS]
    --- SBBSecho 3.37-Linux
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/700)
  • From Accession@46:1/100 to Knight Shadow on Wed Aug 19 17:11:24 2026
    Hey Knight!

    On Tue, 18 Aug 2026 21:13:36 -0500, you wrote:

    Messages coming IN from my uplink into my BBS work it seems. But, for
    some reason, the ones going OUT of my BBS are not showing up here.

    In this case, are you bundling your packets? If so, do you have zip/unzip installed and in the proper place for Mystic to be able to run it (or maybe even defined in your PATH so it can be run from anywhere?)?

    I think I will try:

    1. Sending another message in the AGN_TST channel.
    2. Manually run mutil.exe to generate the packets and verify they go
    into the outbound folder for Agora. 3. Manually run mis.exe to poll the outbound folder and send the packets out to Agora. 4. Verify that the
    files no longer exist in the outbound folder. 5. Verify there were no
    errors logged for the poll mis.exe did.

    Each step here has a separate log file, if I remember Mystic correctly.

    So that should tell me at least that they are going out of the system?

    Yep, and make sure they're going to the right place (Andrew's system, Phoenix BBS).

    I'm not sure what you can see on your end, to see if anything from my
    board is coming in to the echonet. For example I responded to your
    previous message from my board earlier today, but don't see it here. So
    not sure if you can see that message to show that it indeed was sent out from The Boneyard

    I'm not your uplink. So I wouldn't see it until Andrew sends it to my system. So something between your system and his seems to be where the issue lies, but if he's sending you mail just fine, then it's unfortunately probably your system.

    Regards,
    Nick

    ... Sarcasm: because beating people up is illegal.
    --- GoldED+/LNX 1.1.5-b20260425
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/100)
  • From Knight Shadow@46:1/700 to Accession on Wed Aug 19 20:52:47 2026
    Hello Accession,

    On Wed Aug 19 2026 05:11 pm UTC-5:00, you wrote:

    issue lies, but if he's sending you mail just fine, then it's unfortunately probably your system.

    I think so too, plus I'm the newb in this whole equation so I'm placing my bets on it being something I don't have configured properly. I'll keep at it, thanks again!
    |08[|07K|08N1GHT|07S|08HAD0W]
    |08[...|070|08F.|07T|08H3...]
    |08[|07B|080NEYARD.|07B|08BS]
    --- SBBSecho 3.37-Linux
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/700)
  • From Accession@46:1/700 to Knight Shadow on Wed Aug 19 21:31:58 2026
    Hey Knight!

    On Wed, Aug 19 2026 20:52:47 -0500, you wrote:

    I think so too, plus I'm the newb in this whole equation so I'm
    placing my bets on it being something I don't have configured
    properly. I'll keep at it, thanks again!

    If you catch anything in your logs, feel free to share and I may be able to point you in the right direction!

    Regards,
    Nick

    ... Sarcasm, because beating people up is illegal.
    --- SBBSecho 3.37-Linux
    * Origin: _thePharcyde telnet://bbs.pharcyde.org (Wisconsin) (46:1/700)